Funscripted

Ring stroker by Kiiroo

Kiiroo Onyx+ Funscripts: Setup Guide

The Kiiroo Onyx+ is a stroker with ten rings that squeeze in a wave, instead of a motor that moves a sleeve. It plays funscripts over Bluetooth through Intiface Central.

By the Funscripted team. Updated .

Kiiroo Onyx+ at a glance

Maker
Kiiroo. It is the third Onyx model.
Released
On sale by February 2020
Still sold
Listed on kiiroo.com, but sold out
Connection
Bluetooth LE
Motion
Ten rings squeeze in an up and down wave
Top speed
Up to 140 strokes per minute
Battery
About 1 hour of use, 4 hours to charge
Sleeve
3.5 to 4.3 cm wide, up to 16 cm long

How to play funscripts on the Kiiroo Onyx+

  1. 1Put the Onyx+ in pairing mode. Turn it off, then hold the power button for about 15 seconds until the light flashes fast.
  2. 2Pair it in your system Bluetooth settings. Most Kiiroo toys must not be paired this way, but the Onyx+ needs it. Without it, the Onyx+ shows up in Intiface but does not move.
  3. 3Open Intiface Central, start the server and scan. The Onyx+ shows up in the device list.
  4. 4Connect a player such as MultiFunPlayer to Intiface, load the video and its .funscript file, and press play.

Players that work with the Kiiroo Onyx+

  • Intiface Central

    Supports the Onyx+. Other players connect through it.

  • MultiFunPlayer

    Plays local videos and scripts on Windows, and drives the Onyx+ through Intiface Central.

  • XToys

    Browser app that the Buttplug device index lists as Onyx+ compatible.

  • HereSphere

    Lists the Onyx+ as a device that might work, but has not tested it.

How a ring stroker plays a funscript

The Onyx+ has no sleeve that moves. Ten rings inside it squeeze one after the other, which makes a wave that travels up and down.

It still takes a funscript the same way as the Keon: a target position from 0 to 99 and a speed. Your player works out the speed from the timing in the script. Kiiroo rates it at up to 140 strokes per minute, so fast scripts feel smoother on a Keon or The Handy.

Onyx 2 and Titan

  • Onyx 2: an older model, no longer sold. It uses the same protocol as the Fleshlight Launch, and Intiface Central supports it.
  • Titan: no longer sold. It has nine vibration motors and no stroking motion, so it cannot play a stroke script the way a stroker does.

Tips for better sync

  • Always pair the Onyx+ in your system Bluetooth settings before you scan in Intiface Central.
  • Charge it fully before a long session. One charge lasts about an hour.
  • Scripts with a slower, steady pace suit a ring stroker best.
  • If moves feel early or late, change the delay setting in your player. See how to fix sync problems.

Find scripts for the Kiiroo Onyx+

Every script on Funscripted is a standard .funscript file, so it plays on the Kiiroo Onyx+ with any of the players above.

Frequently asked questions

Does the Kiiroo Onyx+ work with funscripts?

Yes. Intiface Central supports the Onyx+, so any player that connects to Intiface, such as MultiFunPlayer, can play funscripts on it.

Why does my Onyx+ connect but not move?

The Onyx+ must be paired in your system Bluetooth settings before Intiface Central uses it. If you skip that step it shows up in Intiface but does not move.

Is the Onyx+ a good funscript device?

It works, but it squeezes with rings instead of moving a sleeve, and it tops out at 140 strokes per minute. Fast scripts feel better on a linear stroker such as the Kiiroo Keon or The Handy.

Is the Kiiroo Onyx+ still sold?

Kiiroo still lists it on its website, but it shows as sold out.

Does the Titan play funscripts?

Not as a stroker. The Titan has nine vibration motors and no stroking motion. It is also discontinued.

Related guides

Sources